ABCO Single Action TILT TABLE details and specifications
I. D. Stewart Pty. Ltd.
ABN 69 001 130 338
Suppliers of quality Physiotherapy and
Rehabilitation Equipment.
Phone 02 9878 4217 (Australia)Mobile 0408 249 432
Send us an email idstewart@bigpond.com
HOME PAGE
BACK to TILT TABLE page
"ABCO" SINGLE ACTION TILT TABLE details
"ABCO" Single Action Tilt Table STANDARD COUCH.
Grey base / Choice of vinyl colours / 700mm wide
Single section 1950mm long from foot plate with recessed
lower section.
Fixed angle removable foot plate.
Fixed Height 67cm.
125mm braked castors giving 155mm ground clearance for
patient hoist access.
Angle indicator.
Set of 3 straps fully adjustable body straps (2 x 100mm wide,
1 x 200mm wide).
Lifting capacity 200kg
"ABCO" Single Action Tilt Table OPTIONS.
Removable Work Surface :- clear plastic
panel with body cut out. Fits to side rails at any point
along the rails. Also available with angle adjustment.
Optional widths - standard is 71cm (57cm to
90cm available).
Torso wedges - adjustable height for torso
support.
Second hand control (or foot control).
Battery backup allows for use when power is
not available.
"ABCO" Single Action Tilt Table SPECIFICATIONS.
Frame :- Heavy gauge steel frame (steel
tube and steel plate), powder coated light grey.
Vinyl Panels :- Navy vinyl (or a choice of
vinyl colours), vinyl medical grade fire retardant and
formulated to inhibit the hardening and breakdown due to oils
and perspiration. 38mm high density foam + 12mm soft foam to
give a firm but comfortable top. Foam is taken over the edge
of the plywood base. This reduces damage from bumps from
trolleys, wheel chairs etc.
Lifting capacity :- 200kg.
Overall dimensions :- 195cm long x 71cm (or
optional width) wide.
Height - 67cm. Wheels
:- 125mm lockable castors Table
weight :- 70kg
Shipping dimensions :- packed on wood pallet
with foam and cardboard cover - 1950x720x820mm 85kg.
Electrical :- Medically approved according
to EN60601-1/AS3200. 230VAC 50Hz 1.5amp. Motor 24VDC max
70VA.
ARTG No.123753
Warranty :- 5 years parts only. (vinyl
warranty subject to wear and tear not covered).
Specifications subject to change
without notice
This information is given as guide to the options available
with this device.
Refer to manufactures instruction book for full operating
details.
Manufactured by ABCO Health Care, Dandenong South, Victoria
(Australia).
I. D. Stewart Pty. Ltd.
ABN 69 001 130 338
56 Twin Road, North Ryde NSW 2113
Phone 02 9878 4217 (Australia)Mobile 0408 249 432
Send us an email idstewart@bigpond.com
HOME PAGE
BACK to TILT TABLE page
Copyright © I.D.Stewart Pty. Ltd. 2019all rights reserved. CoffeeCup HTML Editor (www.coffeecup.com)